0.6um 10% Co Od8*40mm Tungsten Steel Needle Point Pin

• Classification: Heavy Metal
• Hardness: 91.8hra
• Grade: Yl10.2
• Diameter: 8.0mm
• Tolerance of Diameter: -0.05~+0.05
• Length: 40mm
• Model NO.: OD8*40mm
• Tolerance of Length: -0.5~+0.5
• Angle of Needle: 53 Degree
• Transport Package: 25kg. Carton
• Specification: YL10.2
• Trademark: ZZUP
• Origin: Zhuzhou, Hunan, China
• HS Code: 820900100
• Production Capacity: 10000000PCS/Month

Product Description

0.6um 10% Co OD8*40mm Tungsten Steel Needle Point Pin

Products description

1. Grade: YL10.2,YG10X,YG12X,YG15,YG20,YG10,YG8,YG8 etc.
2. diameter from 0.3mm~100mm,
3. length from 10mm~1000mm
4. tolerance for diameter (.-0.05~+0.05),tolerance for length (0~+0.2mm).
5. angles of tips are 30º,60º,90º

Product Name	0.6um 10% Co OD8*40mm Tungsten Steel Needle Point Pin
Material	tungsten carbide
Color	grey
Standard	DIN GB ISO JIS BA ANSI
Grade	YL10.2,YG10X,YG12X,YG15,YG20,YG10,YG8,YG8 etc
Brade	ZZUP
Grain size	0.6um
Used	for milling 45HRC,50HRC,60HRA metals

 

Products Show












Drawing and sizes




 

Grade specification
 

Grade	Density(g/cm3)	Hardness (HRA)	T.R.S (MPa)	Grain size       (μm)	Composition          (%)	Equal to ISO
YL10.2	14.4~14.6	≥92.2	≥4000	0.6~0.8	10% CO 90% WC	K30
YG6X	14.85~15.0	≥92.0	≥1860	0.8~1.0	6% CO 94%  WC	K10
YG15	14.0~14.1	≥85.0	≥2800	1.2~2.0	15%Co 85% WC	/
YG10	14.5~14.6	≥85.5	≥2600	1.2~2.0	10%Co 90% WC	K20
YG8	14.65~14.85	≥89.5	≥2320	1.2~2.0	8% CO 92% WC	K20
YG6	14.85~15.05	≥90.0	≥2150	1.2~2.0	6% CO 94% WC	K10

Packing details






Shipping ways






Production process






Tungsten carbide thimble /needle /grinding point rod introduction:
Tungsten carbide thimble is made of high-quality tungsten carbide material by precision equipment grinding, polishing made of thimble, commonly known as: thimble, support needle, double thimble, flat thimble, insert needle, PIN needle. Because it uses high-quality tungsten carbide material with high hardness 92.0hRA and 4000MPa bending strength, it has high wear resistance and excellent corrosion resistance. It is usually used in plastic moulds. It plays a role in separating plastic products from the moulds, and can also be used through thin and long pinholes. It is often used for lathes and grinding machines to support the workpiece and make the workpiece revolve around it. It is also suitable for making tungsten carbide electrode rod in photoelectric industry. The tip Angle is controlled between 10° and 15°. It is mainly used for automatic solid crystal machine equipment, supporting (top up) auxiliary vacuum adsorption system.
Tungsten steel thimble production process:
Ingredients (according to the requirements of applicable selection of tungsten carbide powder + cobalt powder) to the mix - crushing - drying, sieving after forming agent and dry again to sieving mixture system, the mixed system, pressing - molding - Germany import vacuum suit low sintering sintering furnace - after sintered blank - test (nondestructive ultrasonic flaw detection) - blank dimensions accuracy test - cutting molding to coarse grinding, fine grinding Polishing → inspection → packaging → storage.
Characteristics of tungsten steel thimble:
1.Due to the addition of tantalum carbide TaC with excellent wear resistance and TiC with excellent heat and wear resistance in the alloy composition, it has high wear resistance and its service life is more than 3 times that of SKH51 high speed steel and 65Mn manganese steel.
2.Precise size, high machining accuracy, polishing finish Ra≥0.012 mirror effect.
3.Tungsten carbide thimble has excellent corrosion resistance without rust, can work in acid and alkaline environment, can greatly reduce maintenance cost and maintenance time.