| Customization: | Available |
|---|---|
| Outdiameter: | 115mm |
| Inner Diameter: | 80mm |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
|
Performance&application recommended
|
|||
|
YG6X
|
For small stress streteh forming dies or wear resistance parts
|
||
|
YG6
|
For small stress streteh forming dies or wear resistance parts
|
||
|
YG8
|
For normal stress streteh forming dies or wear resistance parts
|
||
|
YG11
|
Forming or stamping dies for metal powders and nonmetal powders.
|
||
|
YG15
|
It is suitable for drawing steel tubes and rods under high compression ratio,
manufacturing upsetting,punching and stamping tools under large stress.
|
||
|
YG20
|
It is suitable for manufacturing punching dies for watch parts,leaf spring of musical instruments,battery jars, small sized steel balls,screws,screw caps,etc.
|
||
|
YG16C
|
It is suitable for impact-resistant forging dies.
|
||
|
YG18C
|
It is suitable for impact-resistant forging dies,hot-forging dies and finishing rollers.
|
||
|
YG20C
|
It is suitable for wear resistant or impact resistant dies
|
||
|
YG22C
|
It is suitable for nut forming dies and high impact-resistant dies.
|
||
|
YG25C
|
It is suitable for stainless screw dies and semifinishing rollers.
|
||
|
Grade |
Density g/cm3 | T.R.S Mpa | Hardness HRA | Performance & application recommended |
| YG11 | 14.4 | 2420 | 88.5 | Forming or stamping dies for metal powders and nonmetal powders. |
| YG15 | 14.0 | 3000 | 87.0 | It is suitable for drawing steel tubes amd rods under high compression ratio,manufacturing upsetting,punching and stamping tools under large stress. |
| YG20 | 13.5 | 2800 | 85.5 | It is suitable for manufacturing punching dies for watch parts,leaf spring of musical instruments,battery jars,small sizes steel balls,screws,screws caps.etc. |
| YG16C | 13.9 | 2750 | 85.0 | It is suitable for impact-resistant forging dies. |
| YG18C | 13.7 | 2800 | 84.0 | It is suitable for impact-resistant forging dies,hot-forging dies and finishing rollers. |
| YG20C | 13.5 | 2850 | 83.0 | It is suitable for wear resistant or impact resistant dies. |
| YG22C | 13.3 | 2900 | 82.0 | It is suitable for nut forming dies and high impact-resistant dies. |
| YG25C | 13.1 | 2950 | 81.5 | It is suitable for stainless screw dies and semifinishing rollers. |
){kind=link}