Tungsten Carbide Composite Brazing Rod with Particle Size 6.4~8mm

• Customization: Available
• Condition: New, New
• Customized: Customized, Customized
• Model NO.: YD8
• Material: Alloy, Alloy
• Application: Metal Cutting Machine, Metal Cutting Machine
• Grade: Yd8
• Hardness: Hb>=160
• T.R.S: 690MPa
• Length: 280~450mm
• Hra: 89~91
• Particle Size: Particle Size
• Transport Package: Carton
• Trademark: ZZUP
• Origin: Zhuzhou, Hunan, China
• HS Code: 8209009000
• Production Capacity: 10000000PCS/Month
• Package Size: 33.00cm * 6.50cm * 6.50cm
• Package Gross Weight: 1.500kg

Product Description

1.carbide copper alloy brazing rod it is made of by sintering tungsten carbide scrap and elastic matrix alloy,Outer layer of the special flux and coloring is marking scrap grade,the composition of sintering tungsten carbide scrap is mainly CO and WC,The hardness is HRA 89~91,tire body matal is Ni and copper alloy,strength can up to 690MPa, hardness HB≥160.
2.Common particle sizes :1/16" x 1/8" (1.6 x 3.2 mm) , 3/16" x 1/8" (3.2 x 4.8 mm) , 1/4" x 3/16" (4.8 x 6.4 mm) ,    5/16" x 1/4" (6.4 x 7.9mm) , 3/8" x 5/16" (7.9 x 9.5 mm), 1/2" x 3/8" (9.5 x 12.7 mm).
3.length :280mm ,450mm
4. YG +CuSnZn or YG+CuSnZn+10% Ni
5.WC grit compositions : 70% ,60%,50%

grade	particle sizes(mm)	Length of welding rod
YD-9.5	8.2~9.5	280 or 450mm
YD-8	6.4~8.2	280 or 450mm
YD-6.5	4.8~6.4	280 or 450mm
YD-5	3.2~4.8	280 or 450mm
YD-3	1.6~3.2	280 or 450mm

Usages:                             

it is mainly used for surfacing welding the oil, mining, coal mining, geology, construction and other industries in some serious wear and tear or artifacts of both cutting.Such as: milling shoes, grinding, centralizer, reamer, drill pipe joints, hydraulic cutter, scraper, plough planer knives, core bit, piling drill, twist drill, etc.
 

The oxyacetylene butt, the operating process is as follows:
(1) clean up the workpiece, make the welding workpieces surface with metallic luster.
(2) the flat position of welding, therefore can use the appropriate clamping fixture for control of surfacing layer thickness, thick piece of available.
(3) with a neutral flame preheating, flame core not contact surface, the distance to 25 mm is advisable.
(4) carbide surfacing welding layer.With YD type electrode surfacing, the use of neutral flame (can be slightly carbonizing flame) tip is steady on the workpiece surface movement, the flame of the alloy electrode heating (be careful not to make flame cone tip contact alloy particles), tire body in the electrode alloy melt, carbide particles are also falling.Before the tire body of molten metal solidification, the particles arrange, can use left hand of the alloy electrode fingers, or another person holding a base electrode or pull rod on graphite rod in a quick stir particles, making them evenly aligned neatly.Surfacing layer thickness control according to the requirements of design.
(5) after the workpiece welding, where no ventilation, slow cooling, cannot quench, conditional usable asbestos blanket cover.
(6) the workpiece after cooling to room temperature, if necessary, grinding surface surfacing to required size and shape.
(7) clean up the workpiece, remove all splash, slag, etc.

our factory specializes in manufacturing a series of Tungsten Carbide products.such as:

tungsten carbide Saw Tips

tungsten carbide Buttons for Rock Bits

tungsten carbide Inserts for Road Milling, Plaing Bits

tungsten Carbide Inserts for Coal Cutter Picks

tungsten Carbide Inserts for Snopw Plow Blades

tungsten Carbide Inserts for Mining Tools

tungsten Carbide finished or blank Round Rods (dia from 1.0 to 25.4 mm,length 1.0 to 330mm)

tungsten Carbide Tubes

tunsgten Carbide Rings

tungsten Carbide strips and plates

tunsgten Carbide tips for Debarking Bits

tungsten Carbide Brazed Inserts or Tips

tunsgten Carbide pins

Tire studs

tunsgten Carbide Blanks

tunsgten Carbide Wear-Parts

tungsten carbide circular cutter

alloy welding material,etc.