Polished and Ground 6 Sides Customizes Steel Sheet Tungsten Carbide Insert Strip

• Classification: Heavy Metal
• Co: 8%
• Wc: 92%
• Hardness: 89.5hra
• Density: 14.8g/cm3
• T.R.S: 2680MPa
• Model NO.: YG8
• Surface: Only Sintered
• Width: 12mm
• Thickness: 4mm
• Length: 100mm
• Transport Package: 25kg. Carton
• Specification: YG8/K20
• Trademark: ZZUP
• Origin: Zhuzhou, Hunan, China
• HS Code: 820900100
• Production Capacity: 10000000PCS/Month

Product Description

 The Tungsten Carbide Bars, Blanks are made by Extrusion from the highest purity of Materials and Sinter Hiped. Be of very high quality and tool peroformances, the grade for Cutting tools are usually in Sub-micron Grain and Ultra-fine Grain. As demand,the other grade can be custom-made.tungsten carbide round rod is mainly applied in making drills, end mills and reamers. And it is also used for cutting, punching and measuring tools. It is used in the industries of paper making, package, printing, non-ferrous metal processing.
 

Customization Support

Grade	YL10.2
W(mm)	12
L(mm)	100
T(mm)	4
Hardness	14.45
Density g/cm3	91.8
T.R.S Mpa	3000

 

 

 

 

 

 

W(mm)	T(mm)	L(mm)		W(mm)	T(mm)	L(mm)
3~10	1.2~10	10~800		50~60	1.2~10	10~800
10~20	1.2~10	10~800		60~70	1.2~10	10~800
20~30	1.2~10	10~800		70~80	1.2~10	10~800
40~50	1.2~10	10~800		80~100	1.2~10	10~800
17	1.2~10	10~800

 

 

Grade	Density g/cm3	Hardnes HRA	T.R.S Mpa	Performance&application recommended
YG6	14.90	90.5	2400	Good wear resistance,suitable for machining hard, rawwood,aluminum section bar,brass rod and cast iron.
YG6X	14.85	92.5	2000	Wear resistance higher than YG6,suitable for machining hard,rawwood,aluminum section bar,brass rod and cast iron.
YG8	14.7	89.8	2800	High wear and impact resistance,suitable for machining dry wood,soft wood and non-ferrous metal section bar
YS2T	14.25	92.0	2400	Fine grain alloy,with high wear resistance,bending strength,bonding resistance and thermal strength.lt is suitable formachining refractory alloys,stainless steel,high manganesesteel,etc.
YL10.2	14.45	91.8	3000	Wear resistance and strength comparatively higher,suitable for machining cast iron,non-ferrous metal and non-metallid materials