| Customization: | Available |
|---|---|
| Structure: | Single End |
| Pressure: | High Pressure Mechanical Seals |
|
Still deciding? Get samples of US$ 20.6/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Tungsten carbide ring also known as tungsten steel roll ring, static ring, mechanical seal ring, etc., it is made of refractory metal hard compounds and bonded metal through powder metallurgy process made of an alloy products. Tungsten carbide ring has high hardness, good wear resistance, high finish performance, the use of tungsten carbide ring, can effectively reduce the wear between the punch or bearing and equipment, installed on the shaft to position or protect the shaft, prevent shaft wear, and achieve a guiding role.
In the stamping die, the carbide ring die is widely used because of its wear-resistant, good finish and does not need to be replaced frequently, so as to achieve the high efficiency of equipment and personnel.
In the drawing mold, mainly used in some copper, stainless steel products of the drawing.
In the application of oil mining machinery, carbide rings have good wear resistance, corrosion resistance and impact resistance and other excellent properties.
The cemented carbide rings produced by our company have the advantages of strong wear resistance, small friction coefficient, good toughness, long service life, etc., and can be customized according to customer requirements.
Carbide rings are widely used in the sliding parts of various machinery, such as automatic machinery and equipment (telescopic, swaying, sliding, bending, rotating, rotating parts) hydraulic cylinder guide sleeve, gear pump, textile machinery, plastic forming machine, die casting machine, rubber machinery, food machinery, fitness equipment, office machinery, hydraulic carrier, automobile, motorcycle, agriculture and forestry machinery.
| grade | YG8 |
| content | 8%co 92%wc |
| density | 14.7g/cm3 |
| hardness | 89.8hra |
| TRS | 2800MPa |
| sizes | OD50*ID20*20mm |
| Grade | Density g/cm3 | Hardnes HRA | T.R.S Mpa |
Performance&application recommended |
| YG6A | 14.85 | 92.5 | 2000 | Fine grain alloy,good wear resistance.it is suitable for manufacturing forming cutter,wear-resistant parts etc. |
| YG8 | 14.7 | 89.8 | 2800 | High bending strength,wear resistance lower than YG6A, suitable for manufacturing cutter ,wear-resistant parts etc. |
| YG11 | 14.4 | 88.5 | 2900 | High bending strength,wear resistance lower than YG6A, suitable for manufacturing cutter ,wear-resistant parts etc. |
| YG15 | 14.0 | 87.0 | 3000 | Suitable for manufacturing punching dies, wear-resistant parts. |
| YG20 | 13.5 | 85.5 | 2800 | High bending strength,suitable for manufacturing progressive dies and other punching dies. |
| YG25 | 13.1 | 81.5 | 2950 | High bending strength,wear resistance lower than YM6A, suitable for manufacturing cutter ,wear-resistant parts etc. |
| YS2T | 14.25 | 92.0 | 2500 | Fine grain alloy, with high wear resistance, bending strength, bonding resistance and thermal strength. it is suitable for machining refractory alloys,stainless steel, high manganese steel, etc. |
){kind=link}