Product Type: | Wire |
---|---|
Material: | Tungsten Carbide |
Carbon Content: | Low Carbon |
Samples: |
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
Grade |
Density (g/cm³) |
Hardnes (HRA) |
T.R.S(Mpa) |
ISO Code | Application recommended |
Proposal for welding |
|
YG6 | 14.6~15.0 | ≥90.0 | ≥1800 | K20 | Applying to the cutting of ordinary wood | For resistance welding, and the temperature should not be too high | |
YG8 | 14.6~14.9 | ≥89.5 | ≥1900 | K30 | For the cutting of ordinary wood & aluminum material | For resistance welding, and the temperature should not be too high | |
JX5 | 14.6~15.0 | ≥90.5 | ≥1900 | K10 | Applies to the cutting of hard wood,recyling wood and aluminum alloy material | For resistance welding,and the temperature should not be too high | |
JX9 | 14.5~14.9 | ≥90.5 | ≥2000 | K10 | Applying to the cutting of aluminum copper and lead,non-ferrous alloy material | Recommend the high-frequency welding | |
YG6X | 14.7~15.0 | ≥91.5 | ≥1800 | K10 | Applying to the cutting of the timber | Recommend the high-frequency welding | |
JX10 | 14.8~15.1 | ≥93.3 | ≥2500 | K05 | Applying to the cutting of hard wood ,also soft metal | Recommend the high-frequency welding | |
JX15 | 14.6~15.0 | ≥92.5 | ≥2400 | K05 | Applying to the cutting of hardwood and aluminum alloy | Recommend the high-frequency welding | |
JX35 | 14.9~15.2 | ≥93.5 | 2000 | K10 | Applying to the cutting of plywood mdf board and sandwich board | Recommend the high-frequency welding | |
JX40 | 12.8~13.2 | ≥90.5 | ≥2000 | P40 | Applying to the cutting of seel | Recommend the high-frequency welding |
Suppliers with verified business licenses