| Customization: | Available |
|---|---|
| Type: | Circular Saw |
| Power Type: | Electric |
|
Still deciding? Get samples of US$ 48.6/kg
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Tungsten carbide saw tips uses tungsten carbide as raw materials, which are usually used to weld them to sawers to enhance the strength of the tools and extend their service life at the same time. It is widely used. tungsten carbide materials have the characteristics of high hardness and high wear resistance. Therefore, the tungsten carbide saw tips also shows extremely high toughness and greatly extend the processing life of the tool. Compared with other materials, tungsten carbide saw tips is favored by more users.
| Grade | Density (g/cm³) | Hardnes (HRA) | T.R.S(Mpa) | ISO Code | Application recommended |
Proposal for welding | |
| YG6 | 14.6~15.0 | ≥90.0 | ≥1800 | K20 | Applying to the cutting of ordinary wood | For resistance welding, and the temperature should not be too high | |
| YG8 | 14.6~14.9 | ≥89.5 | ≥1900 | K30 | For the cutting of ordinary wood & aluminum material | For resistance welding, and the temperature should not be too high | |
| JX5 | 14.6~15.0 | ≥90.5 | ≥1900 | K10 | Applies to the cutting of hard wood,recyling wood and aluminum alloy material | For resistance welding,and the temperature should not be too high | |
| JX9 | 14.5~14.9 | ≥90.5 | ≥2000 | K10 | Applying to the cutting of aluminum copper and lead,non-ferrous alloy material | Recommend the high-frequency welding | |
| YG6X | 14.7~15.0 | ≥91.5 | ≥1800 | K10 | Applying to the cutting of the timber | Recommend the high-frequency welding | |
| JX10 | 14.8~15.1 | ≥93.3 | ≥2500 | K05 | Applying to the cutting of hard wood ,also soft metal | Recommend the high-frequency welding | |
| JX15 | 14.6~15.0 | ≥92.5 | ≥2400 | K05 | Applying to the cutting of hardwood and aluminum alloy | Recommend the high-frequency welding | |
| JX35 | 14.9~15.2 | ≥93.5 | 2000 | K10 | Applying to the cutting of plywood mdf board and sandwich board | Recommend the high-frequency welding | |
| JX40 | 12.8~13.2 | ≥90.5 | ≥2000 | P40 | Applying to the cutting of seel | Recommend the high-frequency welding | |
| TYPE | Dimension(mm) | |||||
| L | T | W | α° | β° | R | |
| JX4125 | 4.2 | 1.5 | 2.7 | 30 | 20 | 0.5 |
| JX4514 | 4.5 | 1.4 | 3.0 | 28 | 15 | 0.6 |
| JX4515 | 4.5 | 1.5 | 3.5 | 30 | 27 | 0.5 |
| JX4615 | 4.6 | 1.5 | 3.6 | 30 | 26.6 | 0.5 |
| JX4713 | 4.7 | 1.3 | 3.4 | 33 | - | 0.5 |
| JX4715 | 4.7 | 1.5 | 3.7 | 30 | 30 | 0.5 |
| JX4816 | 4.8 | 1.6 | 3.5 | 30 | 17 | 0.5 |
| JX5014 | 5.0 | 1.4 | 3.5 | 30 | 15 | 0.5 |
| JX5014A | 5.0 | 1.4 | 3.5 | 20 | 25 | 0.5 |
| JX5015 | 5.0 | 1.5 | 3.5 | 20 | 20 | 0.5 |
| JX5015A | 5.0 | 1.5 | 4.0 | 30 | 26.5 | 0.5 |
| JX5015B | 5.0 | 1.5 | 4.5 | 20 | 45 | 0.5 |
| JX5015C | 5.0 | 1.5 | 3.6 | 30 | 0.5×45° | - |
| JX5016 | 5.0 | 1.6 | 4.0 | 30 | 22 | 0.5×45° |
| JX5016A | 5.03 | 1.63 | 4.5 | 25 | 0.7×45° | 0.5 |
| JX5016B | 5.0 | 1.6 | 3.6 | 20 | 20 | 0.6 |
| JX5017 | 5.0 | 1.7 | 4.0 | 20 | 17.1 | 0.5 |
| JX5022 | 5.0 | 2.2 | 4.3 | 30 | 15 | 0.5 |
| JX5025 | 5.0 | 2.5 | 3.4 | 25 | 45 | 0.5 |
| JX5115 | 5.1 | 1.5 | 3.7 | 28 | 0.5×45° | 0.2 |
| JX5116 | 5.1 | 1.6 | 2.5 | 30 | 22 | 0.2 |
| JX5216 | 5.2 | 1.6 | 3.8 | 25 | 20 | 0.5 |
| JX5218 | 5.2 | 1.8 | 4.0 | 18 | 40 | 0.5 |
| JX5220 | 5.2 | 2.0 | 3.5 | 30 | 15 | 0.5 |
| JX5315 | 5.3 | 1.5 | 3.8 | 20 | 20 | 0.5 |
| JX53155 | 5.3 | 1.55 | 4.3 | 28 | 15 | 0.5 |
| JX5315A | 5.3 | 1.5 | 4.0 | 30 | 20 | 0.5 |
| ... | … | … | … | … | … | … |
| product name | tungsten carbide saw tips |
| grade | YG6,YG6X,SUM07 |
| grain size | medium grain size,fine grain size,submicron grain size |
| sizes | according to the customer's requests |
| usage | for plywood,solidwood,hardwood and non-ferrous metal etc |
| advantage | high hardness,good wear resistance |
){kind=link}